from METEOR184 Blog

Mooring Deployment

By Anne-Sophie Fortin After mooring recovery, maintenance, and calibration it is now time for mooring deployment. The moored instruments are fixed in intervals on a very long cable as we want to measure water mass fluxes from the surface to the ocean floor. Thus, to deploy a mooring, we need to steam slowly as we […]

from METEOR184 Blog

Surface to the Ocean Floor Survey with the CTD-Rosette

By Anne-Sophie Fortin As we move along the 53oN Array, we are performing “CTD casts” which consist of lowering a CTD-Rosette to the ocean floor and pulling it back up on deck. A CTD is an instrument that precisely measures the Conductivity and Temperature at every Depth. We can then compute the salinity from the […]

from METEOR184 Blog

Glider Deployment

By Anne-Sophie Fortin August 16, 2022 After the successful calibrations performed yesterday, one of the two Gliders has been deployed today. It will be autonomous and take measurements of water properties, such as temperature, salinity, oxygen, and chlorophyll until its recovery a few days from now. Koordinaten: 52.80255, -51.597367

from METEOR184 Blog

Testing Instruments in the Deck Pool

By Anne-Sophie Fortin August 14, 2022 Today was entertaining as Paul, Félix, and Christian calibrated the buoyancy of two Gliders. Gliders are autonomous underwater vehicles using buoyancy to move around. As they can change their pitch, i.e., angle, they can glide horizontally while moving up and down the water column. Calibration of the Glider’s buoyancy […]